Phone +49 9131 9959599

DE EN

Winding machine

FW 322

The FW 322 is the big brother with a sturdy table frame.

  • FW 322 standard – Standard version, traverse width 400 – 800 mm
  • FW 322 reinforced – Reinforced version, traverse width 400 – 800 mm

Photos

  • FW 322 on the machine stand with screen, winding spindle and tailstock
  • Control panel of the FW 322 with emergency stop, push buttons and speed control
  • FW 322 with a wound coil, screen and wire guide
  • FW 322 with wire pay-off and wire tensioners on support rods
  • FW 322 with labelled assemblies: pay-off unit for spools up to 250 mm, wire tensioners, connecting elements, support rod with base and mechanical tailstock
  • Screen of the FW 322 showing a winding program and turns counter

Technical data

Data sheet FW 322
Parameter Unit FW 322 standardFW 322 reinforced
Motor powerkVA4.04.0
Wire rangemm0.01 – 4.00.01 – 5.0
Profile wire/stripmm²––
Feed rangemm0 – 990 – 99
Gearbox
Gearbox, Automatic gearbox, version GSGV
Gearbox, Change gears RSRV
Speed rangerpm
Speed range, stage 1 0 – 1,5000 – 750
Speed range, stage 2 0 – 6,0000 – 3,000
Max. torqueNcm
Max. torque, stage 1 25.250.4
Max. torque, stage 2 6.312.6
Traverse widthmm400/600/800 *400/600/800 *
Clamping lengthmm600/800/1,000 *600/800/1,000 *
Centre heightmm180/240180/240
Winding diametermm350/470350/470
Winding spindles11
Mains supplyV, Hz3 x 400/503 x 400/50
Connected loadkVA4.54.5
Footprint(l × w [× h]) mm
Footprint, traverse width 400 mm 1,700 × 900 × 1,8001,700 × 900 × 1,800
Footprint, traverse width 600 mm 1,900 × 900 × 1,8001,900 × 900 × 1,800
Footprint, traverse width 800 mm 2,100 × 900 × 1,8002,100 × 900 × 1,800
ConnectionsRJ45 network port, USB, VGA port, foot control device, digital inputs/outputs
Display30 cm TFT colour display with touchscreen
Memory capacity500,000 programs
Traverse accuracymm0.0040.004
Stopping accuracyrev.1/1001/100

* Other dimensions available: further traverse widths in 200 mm steps up to max. 2,000 mm; the clamping length increases by 200 mm accordingly.
Gearbox: GS/GV = gearbox standard/reinforced, shifts automatically to the required gear stage; RS/RV = belt-driven machine standard/reinforced, other speeds and torques by changing the gears.
“–” = not applicable or not specified. Subject to technical changes.

Features

  • Integrated PC
  • Freely programmable for maximum flexibility
  • Network capability for efficient program management and offline programming

With IWT winding software – no programming skills required More about the winding software

Catalogue of machines and accessories

Download the catalogue

PDF – version 2026.2, valid from 03/2026

Matching accessories

Tailstocks

Foot control devices

Wire guide carriers

Wire brake · wire tensioning devices · wire tension regulator · withdrawal devices for CuL wires

  • Withdrawal device type 1 Order no. 80153/01 · Wire range Ø 0.01 – 0.05 mm · Winding tension 1.50 – 25.00 cN
  • Withdrawal device type 2 Order no. 80153/52 · Wire range Ø 0.04 – 0.24 mm · Winding tension 0.17 – 3.80 N · AWG 46 – 30 (0.00125 – 0.051 mm²)
  • Withdrawal device type 3 Order no. 80153/53 · Wire range Ø 0.15 – 0.75 mm · Winding tension 2.00 – 28.00 N · AWG 34 – 21 (0.0201 – 0.41 mm²)
  • Withdrawal device type 4 Order no. 80153/54 · Wire range Ø 0.40 – 2.00 mm · Winding tension 10.00 – 140.00 N · AWG 26 – 12 (0.129 – 3.31 mm²)

Spool containers

All accessories with illustrations

Other model series

All model series compared Service and original spare parts via authorised partners

Contact

IWT Industrielle Wickeltechnologie GmbH

Gundstraße 15 · 91056 Erlangen

+49 9131 9959599

info@industrielle-wickeltechnologie.de

Mon–Thu 7:00–16:00

Fri 7:00–12:00

Request a quote