Winding machine
FW 022
The FW 022 stands out for its compactness and robustness – available in single-spindle (E) and twin-spindle (Z) versions.
- FW 022 E – Single-spindle version (tailstock optional)
- FW 022 Z – Twin-spindle version (tailstock optional)
Photos
Technical data
| Parameter | Unit | FW 022 E | FW 022 Z |
|---|---|---|---|
| Motor power | kVA | 0.4 | 0.4 |
| Wire range | mm | 0.01 – 1.0 | 0.01 – 0.6 |
| Profile wire/strip | mm² | – | – |
| Feed range | mm | 0 – 60 | 0 – 60 |
| Gearbox | – | – | |
| Speed range | rpm | ||
| 0 | 0 – 750 | – | |
| 1 | 0 – 1,500 | 0 – 1,500 | |
| 2 | 0 – 3,000 | 0 – 3,000 | |
| 3 | 0 – 6,000 | 0 – 6,000 | |
| 4 | 0 – 12,000 | 0 – 12,000 | |
| Max. torque | Ncm | ||
| 0 | 520 | – | |
| 1 | 260 | 260 | |
| 2 | 130 | 130 | |
| 3 | 65 | 65 | |
| 4 | 32.5 | 32.5 | |
| Traverse width | mm | 100 | 100 |
| Clamping length | mm | ||
| with tailstock | 100 | 100 | |
| Centre height | mm | 210 | 210/140 |
| Winding diameter | mm | 120 | 120 |
| Winding spindles | 1 | 2 | |
| Mains supply | V, Hz | 1 x 230, 50/60 | 1 x 230, 50/60 |
| Connected load | kVA | 0.6 | 0.6 |
| Footprint | (l × w [× h]) mm | ||
| without tailstock | 530 × 350 | 530 × 350 | |
| with tailstock | 680 × 350 | 680 × 350 | |
| Connections | RJ45 network port, USB, VGA port, foot control device, digital inputs/outputs | ||
| Display | 21 cm TFT colour display with touchscreen | ||
| Memory capacity | 500,000 programs | ||
| Traverse accuracy | mm | 0.004 | 0.004 |
| Stopping accuracy | rev. | 1/100 | 1/100 |
“–” = not applicable or not specified. Subject to technical changes.
Features
- Compact PC-controlled winding machine
- Integrated PC with real-time/multithreading system
- Freely programmable for maximum quality and flexibility
- Network capability for efficient program management and offline programming
- Tailstock optional
- High precision and long service life thanks to high-quality components and IWT quality standards
With IWT winding software – no programming skills required More about the winding software
Catalogue of machines and accessories
PDF – version 2026.2, valid from 03/2026
Matching accessories
Foot control devices
- Foot control device, 1 pedal with speed control Order no. 80181/20
- Foot control device, 3 pedals with speed control Order no. 80179/20 · Pedals: start, stop, speed control
Wire guide carriers
- Tube wire guide Order no. 80201/44 · FW 022 E only
- Roller wire guide Order no. 80201/43 · FW 022 E only
- Slide wire guide Order no. 80201/41 · FW 022 E only
- Slide wire guide Order no. 80201/46 · FW 022 Z only
- Roller wire guide Order no. 80201/47 · FW 022 Z only
Wire brake · wire tensioning devices · wire tension regulator · withdrawal devices for CuL wires
- Withdrawal device type 1 Order no. 80153/01 · Wire range Ø 0.01 – 0.05 mm · Winding tension 1.50 – 25.00 cN
- Withdrawal device type 2 Order no. 80153/52 · Wire range Ø 0.04 – 0.24 mm · Winding tension 0.17 – 3.80 N · AWG 46 – 30 (0.00125 – 0.051 mm²)
- Withdrawal device type 3 Order no. 80153/53 · Wire range Ø 0.15 – 0.75 mm · Winding tension 2.00 – 28.00 N · AWG 34 – 21 (0.0201 – 0.41 mm²)
- Withdrawal device type 4 Order no. 80153/54 · Wire range Ø 0.40 – 2.00 mm · Winding tension 10.00 – 140.00 N · AWG 26 – 12 (0.129 – 3.31 mm²)
Spool containers
- Spool container for fixing to the support rod Order no. 80153/12 · Max. spool Ø 125 mm (4.92 in)
- Spool container for fixing to the support rod Order no. 80153/13 · Max. spool Ø 160 mm
- Floor-standing spool container with felt brake Order no. 80131/82 · Max. spool Ø 160 mm · For placing behind the machine
- Floor-standing spool container with felt brake Order no. 80131/83 · Max. spool Ø 250 mm · For placing behind the machine
- Draw-off funnel for container with felt brake Order no. 80131/84 · Max. spool Ø 250 mm
Contact
IWT Industrielle Wickeltechnologie GmbH
Gundstraße 15 · 91056 Erlangen
Mon–Thu 7:00–16:00
Fri 7:00–12:00